Description
Images
Diagrams
Combining a hinge and a latch in a standard piece of hardware.
The 700 Series Spring Release Hinge has a pair of spring-loaded handles which pull toward the center to release the body or door from the keeper. Installation is simple and inexpensive using screws, rivets or by welding.
All styles are manufactured to close tolerances. End play and side play are held to a minimum, ensuring a precision fit and smooth operation.
This latch is ideally suited for applications including aircraft compartments, computer equipment, shelving & storage units, and medical equipment.
Series 700
BODY
| L | Length | 3" | 4" | 6" | Special |
| W | Width | 1" | 1" | 1" | – |
| T | Thickness | .050 | .050 | .050 | – |
| DASH # | -3 | -4 | -6 | -7 |
PIN
| P | Pin Diameter | .250 | Special |
| W | Metal Thickness | 0.50 | - |
| DASH # | -1 | -7 |
HOLES
| None | Standard (2 Holes) | Special | |
| DASH # | -0 | -1 | -7 |
MATERIAL
| Aluminum | Steel | Stainless | |
| DASH # | -1 | -2 | -3 |
MODEL
| Male | Female (Keeper) | Complete Assembly | |
| -1 | -2 | -A |
FINISH
| Most commercial finishes are available including zinc plate on steel, passivate and electropolishing on stainless steel, and anodize on aluminum. |
ORDERING INFORMATION
 |